How does a solar-powered light tower work?

Solar-powered light towers capture the energy released by the sun with photovoltaic panels. Usually, these are installed in the portable solar light tower. The captured energy goes through the inverter and is stored in a battery bank as DC power. Yes, solar light towers can store energy during the day for later use!

The energy kept in the batteries feeds the LED lightings, and that is how solar-powered floodlights work.

The batteries are usually recharged through the internal inverter, powered by solar panels. However, some models have a socket that allows recharging from any external power source in just a few hours.

There are two main factors with a significant impact on the performance of solar panels and on the solar light tower recharging time. These are orientation and tilt.

The position in which you place your portable solar light tower is essential. As the direction that is facing determines how much solar yield your photovoltaic panels receive throughout the day.

In the Northern hemisphere, solar panels are most effective when installed facing the South. However, in the Southern hemisphere, your solar powered light tower is more efficient when installed facing the North.

In some cases, a miscalculated angle set up can lead to an efficiency reduction of between 10% to 15%. The angle of the solar panels is relevant. But it does not impact performance as much as the direction that the light tower faces.

Atlas Copco Power and Flow division has recently released the

Atlas Copco Power and Flow division has recently released the

Atlas Copco Power and Flow division has recently released the

Atlas Copco Power and Flow division has recently released the HiLight S2+ solar light tower. Its innovative design allows end-users to reduce CO2 emissions by up to six tones compared with its diesel-driven homologous. It features four 90W LED solar-powered flood lights that deliver 2,000 m² light coverage.

This user-friendly portable solar light tower features solar panels that can be pulled out from the canopy. The HiLight S2+ delivers 11 hours of light, free of noise and CO2 emissions. Moreover, installing an additional battery set can reach 20 hours of autonomy.

Energy demand or the external temperature when discharging can affect any solar light tower's autonomy. To extend it, the lights of the HiLight S2+ have a dimming function. By adjusting the flood lights' brightness users reduce energy consumption, saving where there is no need for the total light output.

The HiLight S2+ is independent of fuel provisioning. However, sometimes energy demand is higher than solar yield, for example, in certain areas during the winter. Its batteries charge with solar energy in eight hours or through an external power source in just three.

This solar-powered light tower has a socket that enables recharging from any power source. If a total clean solution is needed, users can rely on

The HiLight S2+ is independent of fuel provisioning. However, sometimes energy demand is higher than solar yield, for example, in certain areas during the winter. Its batteries charge with solar energy in eight hours or through an external power source in just three.

This solar-powered light tower has a socket that enables recharging from any power source. If a total clean solution is needed, users can rely on

The HiLight S2+ is independent of fuel provisioning. However, sometimes energy demand is higher than solar yield, for example, in certain areas during the winter. Its batteries charge with solar energy in eight hours or through an external power source in just three.

This solar-powered light tower has a socket that enables recharging from any power source. If a total clean solution is needed, users can rely on

The HiLight S2+ is independent of fuel provisioning. However, sometimes energy demand is higher than solar yield, for example, in certain areas during the winter. Its batteries charge with solar energy in eight hours or through an external power source in just three.

This solar-powered light tower has a socket that enables recharging from any power source. If a total clean solution is needed, users can rely on energy storage systems, such as Atlas Copco’s ZenergiZe range.