Generating nitrogen on-site for laser cutting applications is cheaper and helps increase productivity.
Are you struggling to keep your cost per laser-cut part low? Does it interrupt production every time you need to change a bottle of nitrogen or refill your tank? Whatever your reason for reviewing your nitrogen supply, we are here to help!
How can we help you?
We understand your challenges. After 100 years of operations in the UK we can safely say we've been in business for long enough to understand that you operate in a highly competitive industry where the costs per part are very low!
We supply the complete nitrogen generation package and look after your installation and service from A to Z. Atlas Copco is the only company in the world that designs, manufactures and services the whole nitrogen system including compressors, quality air equipment, nitrogen generators and boosters (up to 40 Barg). We also have 200 factory trained service engineers who can service your whole system and who are available all over the UK.
We advise you on your purity and flow requirements. The extensive testing you've made into the impact and finish of the laser cutting parts has allowed us to help determine the optimum nitrogen purity for any customer's application. We also have plenty of experience in sizing nitrogen packages and utilising high pressure storage for material thicknesses, up-time, cutting pressures and nozzle sizes.
We offer a state-of-the-art package. Our nitrogen generation system is the market leader in terms of efficiency! This is due to three main factors:
It needs the least air for nitrogen ratio.
It does not require a desiccant dryer and associated purge air, allowing 20% air saving.
It typically offers a minimum of 45% energy savings vs. competitors (could go up to 75% savings in energy).
Our NGP+ range provides you with the industry's lowest air factors as standard - as low as 1.8 (95% N2 purity) to 5.4 (99.999%).
Book our free #N2CHECK and find out how much money our nitrogen generators could save you.
Prevents oxidation: Thanks to its inert properties, nitrogen allows the laser to operate in an oxygen-free environment without the risk of oxidation. When your application heats up and comes in contact with oxygen, a phenomenon known as oxidation occurs. This can cause a carbon layer to form on the cut edge resulting in issues such as poor product finish and adhesion problems for any coating or paint applied to the oxidised surface.
Helps purge laser beam: To prevent the beam from distorting and to maintain power and intensity, the beam path needs to be kept clear of dirt particulates and any other contaminants that could cause it to diverge or lose power. Nitrogen is the ideal medium to use for beam guide-way purging as it is dry, clean, oil-free and has a very low contaminant content.
What are the benefits of using nitrogen generators for your laser cutting application?
Lower cost:
Lower cost:
Lower cost:
Lower cost:Nitrogen assist and purge gas are some of the highest costs when it comes to laser cutting, particularly for fibre lasers . So any savings that will be made as a result of generating your own nitrogen will positively affect your bottom line and help you maximise your profit.
Higher productivity: By saving the time that is normally spent on changing tanks, you will ensure that your application runs continuously and without much attention from the operator.
Better control: Generating your own nitrogen means no more ordering, changing and running out of bottles. No more liquid deliveries interrupting production, and you no longer have to deal with suppliers' unpredictable price increases.
Highest efficiency: No oxide edge, high purity 99.999% gas available.
On demand nitrogen: This plug and play solution is sized to match your laser cutter, so you never need to empty your bottles and refill during valuable production hours
Plug and play solution: No need to buy separate compressors and equipment. Easily modified and upgraded if production increases as well as other
Lower cost:
Lower cost:
Lower cost:Nitrogen assist and purge gas are some of the highest costs when it comes to laser cutting, particularly for fibre lasers . So any savings that will be made as a result of generating your own nitrogen will positively affect your bottom line and help you maximise your profit.
Higher productivity: By saving the time that is normally spent on changing tanks, you will ensure that your application runs continuously and without much attention from the operator.
Better control: Generating your own nitrogen means no more ordering, changing and running out of bottles. No more liquid deliveries interrupting production, and you no longer have to deal with suppliers' unpredictable price increases.
Highest efficiency: No oxide edge, high purity 99.999% gas available.
On demand nitrogen: This plug and play solution is sized to match your laser cutter, so you never need to empty your bottles and refill during valuable production hours
Plug and play solution: No need to buy separate compressors and equipment. Easily modified and upgraded if production increases as well as other
Lower cost:Nitrogen assist and purge gas are some of the highest costs when it comes to laser cutting, particularly for fibre lasers . So any savings that will be made as a result of generating your own nitrogen will positively affect your bottom line and help you maximise your profit.
Higher productivity: By saving the time that is normally spent on changing tanks, you will ensure that your application runs continuously and without much attention from the operator.
Better control: Generating your own nitrogen means no more ordering, changing and running out of bottles. No more liquid deliveries interrupting production, and you no longer have to deal with suppliers' unpredictable price increases.
Highest efficiency: No oxide edge, high purity 99.999% gas available.
On demand nitrogen: This plug and play solution is sized to match your laser cutter, so you never need to empty your bottles and refill during valuable production hours
Plug and play solution: No need to buy separate compressors and equipment. Easily modified and upgraded if production increases as well as other
Lower cost:
Lower cost:Nitrogen assist and purge gas are some of the highest costs when it comes to laser cutting, particularly for fibre lasers . So any savings that will be made as a result of generating your own nitrogen will positively affect your bottom line and help you maximise your profit.
Higher productivity: By saving the time that is normally spent on changing tanks, you will ensure that your application runs continuously and without much attention from the operator.
Better control: Generating your own nitrogen means no more ordering, changing and running out of bottles. No more liquid deliveries interrupting production, and you no longer have to deal with suppliers' unpredictable price increases.
Highest efficiency: No oxide edge, high purity 99.999% gas available.
On demand nitrogen: This plug and play solution is sized to match your laser cutter, so you never need to empty your bottles and refill during valuable production hours
Plug and play solution: No need to buy separate compressors and equipment. Easily modified and upgraded if production increases as well as other
Lower cost:Nitrogen assist and purge gas are some of the highest costs when it comes to laser cutting, particularly for fibre lasers . So any savings that will be made as a result of generating your own nitrogen will positively affect your bottom line and help you maximise your profit.
Higher productivity: By saving the time that is normally spent on changing tanks, you will ensure that your application runs continuously and without much attention from the operator.
Better control: Generating your own nitrogen means no more ordering, changing and running out of bottles. No more liquid deliveries interrupting production, and you no longer have to deal with suppliers' unpredictable price increases.
Highest efficiency: No oxide edge, high purity 99.999% gas available.
On demand nitrogen: This plug and play solution is sized to match your laser cutter, so you never need to empty your bottles and refill during valuable production hours
Plug and play solution: No need to buy separate compressors and equipment. Easily modified and upgraded if production increases as well as other benefits .
What type of nitrogen generation packages are available to you ?
A cylinder filling system that is designed to produce a small amount of gas on a continuous basis and then compress it to high pressure (300 – 350 bar g) for storage in a high pressure storage bank(s). This type of system is ideal for intermittent usage or where demand can fluctuate from high to low flow requirements frequently. Typically, a contract laser cutting job shop would benefit from this type of installation.
A gas on demand system that is designed to meet the maximum flow requirement of the application with a small buffer stored at 40 bar .
See how our equipment is used by our nitrogen customers
Having invested in state-of-the-art laser equipment that would allow faster production turnaround, 24-hour operation, and a variable system for future capacity, Oldham based Laser cutter, ABi Laser found that the equipment’s full potential was hampered by the supply, specification, and costs of delivered nitrogen, which is essential for the process. The situation was remedied when increased productivity, continuity of supply, and substantial cost savings were achieved by the installation of an Atlas Copco on-site, nitrogen generation skid package.
Leading metal fabrication firm Advance Engineering has invested in an Atlas Copco on-site nitrogen generation system to ensure the quality of its laser-cutting operation, increase output and make substantial cost savings when set against delivered bottled gas supplies. The system was supplied by Atlas Copco’s premier distributor, Anglian Compressors & Equipment Ltd.
