您正在使用我们不再支持的浏览器。要继续访问我们的网站，请选择以下受支持的浏览器之一。
Torque limited in forward: 60/70 ft. Lbs. - 90/100 NmFull power in reverseOne Hand Operation: 2 power setting positionsInsulation & Comfort: Contoured comfort grip handle instead of TPR injected in handleLow sound levelSuited for all light vehicle tire changing applicationsCan be transportable as a tool boxRemovable foam insert to be placed in a rolling cabinet drawer High quality composite case supplied a bi-material handle and composite latches
1/2" composite impact wrench with friction ring socket retainer2 setting positions : one in Reverse and one Torque Limited in forward60/70 ft. lbs. - 90/100 Nm in torque limited position in forward920 ft.lbs - 1,250Nm of maximum torque in reverseAluminum clutch & rear housingsThermo-plastic rubber injected in housing - Resistant to most chemicals used in workshopsUniversal & durable twin hammer mechanismFull teasing trigger360° swivel air inlet3 Wheel Sockets included / 17 – 19 & 21 mm80 mm length, with anti-scratch protection, extra thin-walled for alloy rims, painted rims and polished cap nutsHigh quality composite case supplied a bi-material handle and composite latchesThe CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly. Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.
| Metric | Imperial | |
| 型号 | CP7748TL-2K | |
| 零件号 | 8940173408 | |
| 冲击器类型 | Twin Hammer | |
| 功率重量比 | 520.8 Nm/kg | 174 ft.lb/lb |
| 噪声级 | 86 db(A) | |
| 声功率 | 97 db(A) | |
| 套筒定位器 | 摩擦环 | |
| 实际耗气量 | 10 l/s | 22 cfm |
| 工作扭矩范围（正转） | 90 - 96 Nm | 66 - 70 ft.lbs |
| 平均耗气量 | 2 1/2 l/s | 5 1/2 cfm |
| 振动 | 4.8 m/s² | |
| 振动 ISO | ISO-28927-2 | |
| 振动 K | 1 1/2 m/s² | |
| 握把类型 | 手枪式 | |
| 方头驱动 | 1/2 " | |
| 最大扭矩（反转） | 1250 Nm | 920 ft.lbs |
| 最小软管尺寸 | 10 mm | 3/8 " |
| 欧洲标准 | EN ISO 11148-6:2013 | |
| 每分钟打击次数 | 850 | |
| 空载转速 | 8200 转速 | |
| 边缘至中心 | 38 mm | 1 1/2 " |
| 进气口螺纹尺寸 | 1/4 " | |
| 重量 | 2.4 kg | 5.3 lb |
| 长度 | 250 mm | 9.8 " |
